Koala nano PC
From Koala
Revision as of 15:07, 12 February 2008 by MarcoCavallini (talk)
Koala nano PC
Patch per linux kernel-2.6.18
Questa patch permette di attivare la LAN del Koala nano PC
diff -urN linux-2.6.18.orig/drivers/ide/pci/it821x.c linux-2.6.18/drivers/ide/pci/it821x.c
--- linux-2.6.18.orig/drivers/ide/pci/it821x.c 2006-09-20 11:42:06.000000000 +0800
+++ linux-2.6.18/drivers/ide/pci/it821x.c 2007-07-27 17:30:10.000000000 +0800
@@ -233,7 +233,10 @@
static u8 it821x_ratemask (ide_drive_t *drive)
{
- u8 mode = 4;
+ /* DMP patched */
+ /* A dirty hack for the BadCRC issue on Vortex86SX */
+ /* Force all udma mode to be downgraded to mdma2 */
+ u8 mode = 0;
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
@@ -310,7 +313,7 @@
it821x_clock_strategy(drive);
/* FIXME: do we need to program this ? */
- /* it821x_program(drive, itdev->mwdma[unit]); */
+ it821x_program(drive, itdev->mwdma[unit]);
}
/**
@@ -541,8 +544,21 @@
static unsigned int __devinit ata66_it821x(ide_hwif_t *hwif)
{
- /* The reference driver also only does disk side */
- return 1;
+ /* DMP pacthed */
+ struct pci_dev *dev = hwif->pci_dev;
+ unsigned int ata66 = 0;
+ u8 cable_80_pin[2] = { 0, 0 };
+ u16 regw = 0;
+
+ pci_read_config_word(dev, 0x40, ®w);
+ /* printk(KERN_INFO "DMP: %04X\n", regw); */
+
+ if (!(regw & 0x0008)) cable_80_pin[1] = 1;
+ if (!(regw & 0x0004)) cable_80_pin[0] = 1;
+
+ ata66 = (hwif->channel) ? cable_80_pin[1] : cable_80_pin[0];
+
+ return ata66;
}
/**
@@ -791,6 +807,7 @@
static struct pci_device_id it821x_pci_tbl[] = {
{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8212, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0x17F3, 0x1010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0, },
};
diff -urN linux-2.6.18.orig/drivers/net/Kconfig linux-2.6.18/drivers/net/Kconfig
--- linux-2.6.18.orig/drivers/net/Kconfig 2006-09-20 11:42:06.000000000 +0800
+++ linux-2.6.18/drivers/net/Kconfig 2007-07-25 17:36:05.000000000 +0800
@@ -1567,6 +1567,25 @@
<file:Documentation/networking/net-modules.txt>. The module
will be called es3210.
+config R6040
+ tristate "RDC R6040 PCI Fast Ethernet support"
+ depends on NET_PCI && PCI
+ select CRC32
+ select MII
+ help
+ To compile this driver as a module, choose M here: the module
+ will be called r6040. This is recommended.
+
+config R6040_NAPI
+ bool "Use Rx Polling (NAPI)"
+ depends on R6040
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
depends on NET_PCI && PCI && EXPERIMENTAL
diff -urN linux-2.6.18.orig/drivers/net/Makefile linux-2.6.18/drivers/net/Makefile
--- linux-2.6.18.orig/drivers/net/Makefile 2006-09-20 11:42:06.000000000 +0800
+++ linux-2.6.18/drivers/net/Makefile 2007-07-25 17:35:26.000000000 +0800
@@ -164,6 +164,7 @@
obj-$(CONFIG_LASI_82596) += lasi_82596.o
obj-$(CONFIG_MVME16x_NET) += 82596.o
obj-$(CONFIG_BVME6000_NET) += 82596.o
+obj-$(CONFIG_R6040) += r6040.o
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
diff -urN linux-2.6.18.orig/drivers/net/r6040.c linux-2.6.18/drivers/net/r6040.c
--- linux-2.6.18.orig/drivers/net/r6040.c 1970-01-01 08:00:00.000000000 +0800
+++ linux-2.6.18/drivers/net/r6040.c 2007-07-25 17:35:26.000000000 +0800
@@ -0,0 +1,1101 @@
+/* r6040.c: A RDC R6040 FastEthernet driver for linux. */
+/*
+ Re-written 2004 by Sten Wang.
+
+ Copyright 1994-2000 by Donald Becker.
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency. This software may be used and
+ distributed according to the terms of the GNU General Public License,
+ incorporated herein by reference.
+
+ This driver is for RDC R6040 FastEthernet MAC series.
+ For kernel version after 2.4.22
+
+ Modification List
+ ---------- ------------------------------------------------
+ 04-13-2007 Support the mac address auto download
+ 02-14-2007 Support mii-tool to R/W phy & fix the bug which the dhcp client can not get IP
+ 09-26-2006 Modify the Rx NAPI bug with SPD
+ 09-14-2006 Change the previous NAPI( Tx/Rx polling) to NAPI( Rx polling )
+ 08-24-2006 Support at linux 2.6.10 above
+ 03-24-2006 Support NAPI
+ 03-21-2006 By Charies,change spin_lock_irqsave(lp->lock, flags) to
+ spin_lock_irqsave(&lp->lock, flags) in set_multicast_list
+ 03-15-2006 Modify the set_multicast_list ,due to when re-plug the ethernet,
+ it will forget the previous setting
+ 07-12-2005 Tim, modify the set_multicast_list
+ 03-28-2005 Tim, modify some error mac register offset in
+ function set_multicast_list
+ 03-27-2005 Tim, Add the internal state machine reset
+ Sten, If multicast address more than 4, enter PROM mode
+ Changed rdc to r6040
+ 12-22-2004 Sten Init MAC MBCR register=0x012A
+ PHY_CAP = 0x01E1
+
+ Need to Do List:
+ 1. If multicast address more than 4, use the multicast address hash
+*/
+
+#define DRV_NAME "r6040"
+#define DRV_VERSION "0.17"
+#define DRV_RELDATE "13Apr2007"
+
+
+/* PHY CHIP Address */
+#define PHY1_ADDR 1 /* For MAC1 */
+#define PHY2_ADDR 2 /* For MAC2 */
+#define PHY_MODE 0x3100 /* PHY CHIP Register 0 */
+#define PHY_CAP 0x01E1 /* PHY CHIP Register 4 */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (600 * HZ / 1000)
+#define TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
+
+/* RDC MAC ID */
+#define RDC_MAC_ID 0x6040
+
+/* RDC MAC I/O Size */
+#define R6040_IO_SIZE 256
+
+/* RDC Chip PCI Command */
+#define R6040_PCI_CMD 0x0005 /* IO, Master */
+
+/* MAX RDC MAC */
+#define MAX_MAC 2
+
+/* MAC setting */
+#define TX_DCNT 20 /* TX descriptor count */
+#define RX_DCNT 256 /* RX descriptor count */
+#define MAX_BUF_SIZE 0x600
+#define ALLOC_DESC_SIZE ((TX_DCNT+RX_DCNT)*sizeof(struct r6040_descriptor)+0x10)
+#define MBCR_DEFAULT 0x012A /* MAC Bus Control Register */
+
+/* Debug enable or not */
+#define RDC_DEBUG 0
+
+#if RDC_DEBUG > 1
+#define RDC_DBUG(msg, value) printk("%s %x\n", msg, value);
+#else
+#define RDC_DBUG(msg, value)
+#endif
+
+#include <linux/module.h>
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
+#include <linux/moduleparam.h>
+#endif
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h> /* for udelay() */
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/spinlock.h>
+
+#include <asm/processor.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+//Added by Keilven, 08/16/2006
+#ifdef FAST_NAT
+ extern software_nat_init(struct net_device *dev);
+ extern void shnat_external_cmd(char *cmd);
+#endif
+
+MODULE_AUTHOR("Sten Wang <sten.wang@rdc.com.tw>");
+MODULE_LICENSE("GPL");
+#ifdef CONFIG_R6040_NAPI
+MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet Driver");
+#else
+MODULE_DESCRIPTION("RDC R6040 PCI FastEthernet Driver");
+#endif
+
+#define RX_INT 0x0001
+#define TX_INT 0x0010
+#define RX_NO_DESC_INT 0x0002
+
+#define R6040_INT_MASK (RX_INT | TX_INT)
+
+struct r6040_descriptor {
+ u16 status, len; /* 0-3 */
+ u32 buf; /* 4-7 */
+ u32 ndesc; /* 8-B */
+ u32 rev1; /* C-F */
+ char *vbufp; /* 10-13 */
+ struct r6040_descriptor *vndescp; /* 14-17 */
+ struct sk_buff *skb_ptr; /* 18-1B */
+ u32 rev2; /* 1C-1F */
+} __attribute__(( aligned(32) ));
+
+struct r6040_private {
+ struct net_device_stats stats;
+ spinlock_t lock;
+ struct timer_list timer;
+ struct pci_dev *pdev;
+
+ struct r6040_descriptor *rx_insert_ptr;
+ struct r6040_descriptor *rx_remove_ptr;
+ struct r6040_descriptor *tx_insert_ptr;
+ struct r6040_descriptor *tx_remove_ptr;
+ u16 tx_free_desc, rx_free_desc, phy_addr, phy_mode;
+ u16 mcr0, mcr1;
+ dma_addr_t desc_dma;
+ char *desc_pool;
+
+#ifdef CONFIG_R6040_NAPI
+ u16 NAPI_RX_RUNNING ;
+#endif
+ struct mii_if_info mii_if;
+};
+
+struct r6040_chip_info {
+ const char *name;
+ u16 pci_flags;
+ int io_size;
+ int drv_flags;
+};
+
+
+
+static int __devinitdata printed_version;
+#ifdef CONFIG_R6040_NAPI
+static char version[] __devinitdata =
+ KERN_INFO DRV_NAME ": RDC R6040 RX NAPI net driver, version "DRV_VERSION " (" DRV_RELDATE ")\n";
+#else
+static char version[] __devinitdata =
+ KERN_INFO DRV_NAME ": RDC R6040 net driver, version "DRV_VERSION " (" DRV_RELDATE ")\n";
+#endif
+static struct r6040_chip_info r6040_chip_info[] __devinitdata =
+{
+ { "RDC R6040 Knight", R6040_PCI_CMD, R6040_IO_SIZE, 0}
+};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
+static int NUM_MAC_TABLE = 2 ;
+#endif
+
+static int phy_table[] = {0x1, 0x2};
+static u8 adr_table[2][8] = {{0x00, 0x00, 0x60, 0x00, 0x00, 0x01}, {0x00, 0x00, 0x60, 0x00, 0x00, 0x02}};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
+ module_param_array(adr_table, int, &NUM_MAC_TABLE, 0644);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
+ module_param_array(adr_table, int, NUM_MAC_TABLE, 0644);
+#else
+ MODULE_PARM(adr_table, "2-4i");
+#endif
+MODULE_PARM_DESC(adr_table, "MAC Address (assigned)");
+
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int r6040_open(struct net_device *dev);
+static int r6040_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t r6040_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static struct net_device_stats *r6040_get_stats(struct net_device *dev);
+static int r6040_close(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static struct ethtool_ops netdev_ethtool_ops;
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
+static void r6040_down(struct net_device *dev);
+static void r6040_up(struct net_device *dev);
+static void r6040_tx_timeout (struct net_device *dev);
+static void r6040_timer(unsigned long);
+
+static int phy_mode_chk(struct net_device *dev);
+static int phy_read(int ioaddr, int phy_adr, int reg_idx);
+static void phy_write(int ioaddr, int phy_adr, int reg_idx, int dat);
+static void rx_buf_alloc(struct r6040_private *lp,struct net_device *dev);
+static int r6040_GetSet_MACaddress(struct net_device *dev);
+#ifdef CONFIG_R6040_NAPI
+static int r6040_poll(struct net_device *netdev, int *budget);
+#endif
+
+
+static int mdio_read(struct net_device *dev, int phy_id, int regnum)
+{
+ struct r6040_private *lp = dev->priv;
+ long ioaddr = dev->base_addr;
+
+ return (phy_read(ioaddr, lp->phy_addr, regnum)) ;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value)
+{
+ struct netdev_private *np = dev->priv;
+ struct r6040_private *lp = dev->priv;
+ long ioaddr = dev->base_addr;
+
+ phy_write(ioaddr, lp->phy_addr, regnum, value);
+}
+
+static int __devinit r6040_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev;
+ struct r6040_private *lp;
+ int ioaddr, io_size, err;
+ static int card_idx = -1;
+ int chip_id = (int)ent->driver_data;
+
+ RDC_DBUG("r6040_init_one()", 0);
+
+ if (printed_version++)
+ printk(version);
+
+ if ((err = pci_enable_device (pdev)))
+ return err;
+
+ /* this should always be supported */
+ if (pci_set_dma_mask(pdev, 0xffffffff)) {
+ printk(KERN_ERR DRV_NAME "32-bit PCI DMA addresses not supported by the card!?\n");
+ return -ENODEV;
+ }
+
+ /* IO Size check */
+ io_size = r6040_chip_info[chip_id].io_size;
+ if (pci_resource_len (pdev, 0) < io_size) {
+ return -ENODEV;
+ }
+
+ ioaddr = pci_resource_start (pdev, 0); /* IO map base address */
+ pci_set_master(pdev);
+
+ dev = alloc_etherdev(sizeof(struct r6040_private));
+ if (dev == NULL)
+ return -ENOMEM;
+ SET_MODULE_OWNER(dev);
+
+ if (pci_request_regions(pdev, DRV_NAME)) {
+ printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ /* Init system & device */
+ lp = dev->priv;
+ dev->base_addr = ioaddr;
+ dev->irq = pdev->irq;
+
+ spin_lock_init(&lp->lock);
+ pci_set_drvdata(pdev, dev);
+
+ card_idx++;
+
+ //Check if the MAC address is 0xFFFFFFFFFFFF or 0
+ if(((inw(ioaddr + 0x68) ==0xFFFF) && (inw(ioaddr + 0x6A)==0xFFFF) && (inw(ioaddr + 0x6C)==0xFFFF)) ||
+ ((inw(ioaddr + 0x68) == 0) && (inw(ioaddr + 0x6A)== 0) && (inw(ioaddr + 0x6C)== 0)))
+ memcpy(dev->dev_addr, (u8 *)&adr_table[card_idx][0], 6);
+ else
+ {
+ u16 *adrp;
+ adrp = (u16 *) dev->dev_addr;
+
+ adrp[0] = inw(ioaddr + 0x68);
+ adrp[1] = inw(ioaddr + 0x6A);
+ adrp[2] = inw(ioaddr + 0x6C);
+ }
+
+ /* Link new device into r6040_root_dev */
+ lp->pdev = pdev;
+
+ /* Init RDC private data */
+ lp->mcr0 = 0x1002;
+ lp->phy_addr = phy_table[card_idx];
+
+ /* The RDC-specific entries in the device structure. */
+ dev->open = &r6040_open;
+ dev->hard_start_xmit = &r6040_start_xmit;
+ dev->stop = &r6040_close;
+ dev->get_stats = &r6040_get_stats;
+ dev->set_multicast_list = &set_multicast_list;
+ dev->do_ioctl = &netdev_ioctl;
+ dev->ethtool_ops = &netdev_ethtool_ops;
+ dev->tx_timeout = &r6040_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ lp->mii_if.dev = dev;
+ lp->mii_if.mdio_read = mdio_read;
+ lp->mii_if.mdio_write = mdio_write;
+ lp->mii_if.phy_id = lp->phy_addr ;
+ lp->mii_if.phy_id_mask = 0x1f;
+ lp->mii_if.reg_num_mask = 0x1f;
+
+#ifdef CONFIG_R6040_NAPI
+ dev->poll = &r6040_poll;
+ dev->weight = 64;
+#endif
+
+ /* Register net device. After this dev->name assign */
+ if ((err = register_netdev(dev))) {
+ printk(KERN_ERR DRV_NAME ": Failed to register net device\n");
+ goto err_out_res;
+ }
+
+ netif_carrier_on(dev);
+ return 0;
+
+err_out_res:
+ pci_release_regions(pdev);
+err_out_disable:
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ kfree(dev);
+
+ return err;
+}
+
+static void __devexit r6040_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ unregister_netdev(dev);
+ pci_release_regions(pdev);
+ kfree(dev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static int
+r6040_open(struct net_device *dev)
+{
+ struct r6040_private *lp = dev->priv;
+ int i;
+
+ RDC_DBUG("r6040_open()", 0);
+
+ r6040_GetSet_MACaddress(dev);
+
+ /* Request IRQ and Register interrupt handler */
+ i = request_irq(dev->irq, &r6040_interrupt, SA_SHIRQ, dev->name, dev);
+ if (i) return i;
+
+ /* Allocate Descriptor memory */
+ lp->desc_pool = pci_alloc_consistent(lp->pdev, ALLOC_DESC_SIZE, &lp->desc_dma);
+ if (!lp->desc_pool) return -ENOMEM;
+
+ r6040_up(dev);
+
+ netif_start_queue(dev);
+
+ /* set and active a timer process */
+ init_timer(&lp->timer);
+ lp->timer.expires = TIMER_WUT;
+ lp->timer.data = (unsigned long)dev;
+ lp->timer.function = &r6040_timer;
+ add_timer(&lp->timer);
+
+#ifdef FAST_NAT
+ software_nat_init(dev); //Added by Keilven, 08/16/2006
+#endif
+
+ return 0;
+}
+
+static void
+r6040_tx_timeout (struct net_device *dev)
+{
+ struct r6040_private *lp = dev->priv;
+ //int ioaddr = dev->base_addr;
+ //struct r6040_descriptor *descptr = lp->tx_remove_ptr;
+
+ RDC_DBUG("r6040_tx_timeout()", 0);
+
+ /* Transmitter timeout, serious problems. */
+ /* Sten: Nothing need to do so far. */
+ printk(KERN_ERR DRV_NAME ": Big Trobule, transmit timeout/n");
+ lp->stats.tx_errors++;
+ netif_stop_queue(dev);
+
+//printk("<RDC> XMT timedout: CR0 %x, CR40 %x, CR3C %x, CR2C %x, CR30 %x, CR34 %x, CR38 %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c), inw(ioaddr+0x2c), inw(ioaddr+0x30), inw(ioaddr+0x34), inw(ioaddr+0x38));
+
+//printk("<RDC> XMT_TO: %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
+}
+
+
+static int
+r6040_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct r6040_private *lp = dev->priv;
+ struct r6040_descriptor *descptr;
+ int ioaddr = dev->base_addr;
+ unsigned long flags;
+
+ RDC_DBUG("r6040_start_xmit()", 0);
+
+ if (skb == NULL) /* NULL skb directly return */
+ return 0;
+ if (skb->len >= MAX_BUF_SIZE) { /* Packet too long, drop it */
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ /* Critical Section */
+ spin_lock_irqsave(&lp->lock, flags);
+
+ /* TX resource check */
+ if (!lp->tx_free_desc) {
+ spin_unlock_irqrestore(&lp->lock, flags);
+ printk(KERN_ERR DRV_NAME ": NO TX DESC ");
+ return 1;
+ }
+
+ /* Statistic Counter */
+ lp->stats.tx_packets++;
+ lp->stats.tx_bytes += skb->len;
+
+ /* Set TX descriptor & Transmit it */
+ lp->tx_free_desc--;
+ descptr = lp->tx_insert_ptr;
+ if (skb->len < 0x3c) descptr->len = 0x3c;
+ else descptr->len = skb->len;
+ descptr->skb_ptr = skb;
+ descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, skb->data, skb->len, PCI_DMA_TODEVICE));
+ descptr->status = 0x8000;
+ outw(0x01, ioaddr + 0x14);
+ lp->tx_insert_ptr = descptr->vndescp;
+
+#if RDC_DEBUG
+ printk("Xmit(): %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
+#endif
+
+ /* If no tx resource, stop */
+ if (!lp->tx_free_desc)
+ netif_stop_queue(dev);
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return 0;
+}
+
+/* The RDC interrupt handler. */
+static irqreturn_t
+r6040_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct r6040_private *lp;
+ struct r6040_descriptor *descptr;
+ struct sk_buff *skb_ptr;
+ int ioaddr, status;
+ unsigned long flags;
+#ifdef CONFIG_R6040_NAPI
+ int handled = 1;
+#else
+ int handled = 0;
+#endif
+
+ RDC_DBUG("r6040_interrupt()", 0);
+ if (dev == NULL) {
+ printk (KERN_ERR DRV_NAME ": INT() unknown device.\n");
+ return IRQ_RETVAL(handled);
+ }
+
+ lp = (struct r6040_private *)dev->priv;
+ spin_lock_irqsave(&lp->lock, flags);
+
+ /* Check MAC Interrupt status */
+ ioaddr = dev->base_addr;
+ outw(0x0, ioaddr + 0x40); /* Mask Off RDC MAC interrupt */
+ status = inw(ioaddr + 0x3c); /* Read INTR status and clear */
+
+
+#ifdef CONFIG_R6040_NAPI
+ /* TX interrupt request */
+ if (status & 0x10)
+ {
+ handled = 1;
+ descptr = lp->tx_remove_ptr;
+ while(lp->tx_free_desc < TX_DCNT)
+ {
+ if (descptr->status & 0x8000) break; /* Not complte */
+ skb_ptr = descptr->skb_ptr;
+ pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(skb_ptr); /* Free buffer */
+ descptr->skb_ptr = 0;
+ descptr = descptr->vndescp; /* To next descriptor */
+ lp->tx_free_desc++;
+ }
+ lp->tx_remove_ptr = descptr;
+ if (lp->tx_free_desc) netif_wake_queue(dev);
+ }
+ /* RX interrupt request */
+ if ((!lp->NAPI_RX_RUNNING) && (status & 0x01) )
+ {
+ if(netif_rx_schedule_prep(dev))
+ __netif_rx_schedule(dev);
+ }
+
+ if(lp->NAPI_RX_RUNNING)
+ outw( TX_INT , ioaddr + 0x40);
+ else
+ outw( R6040_INT_MASK, ioaddr + 0x40);
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return IRQ_RETVAL(handled);
+
+#else
+ /* TX interrupt request */
+ if (status & 0x10) {
+ handled = 1;
+ descptr = lp->tx_remove_ptr;
+ while(lp->tx_free_desc < TX_DCNT) {
+ if (descptr->status & 0x8000) break; /* Not complte */
+ skb_ptr = descptr->skb_ptr;
+ pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(skb_ptr); /* Free buffer */
+ descptr->skb_ptr = 0;
+ descptr = descptr->vndescp; /* To next descriptor */
+ lp->tx_free_desc++;
+ }
+ lp->tx_remove_ptr = descptr;
+ if (lp->tx_free_desc) netif_wake_queue(dev);
+ }
+
+ /* RX interrupt request */
+ if (status & 0x01) {
+ handled = 1;
+ descptr = lp->rx_remove_ptr;
+ while(lp->rx_free_desc) {
+ if (descptr->status & 0x8000) break; /* No Rx packet */
+ skb_ptr = descptr->skb_ptr;
+ descptr->skb_ptr = 0;
+ skb_ptr->dev = dev;
+ skb_put(skb_ptr, descptr->len - 4);
+ pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+ skb_ptr->protocol = eth_type_trans(skb_ptr, dev);
+ netif_rx(skb_ptr); /* Send to upper layer */
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += descptr->len;
+ descptr = descptr->vndescp; /* To next descriptor */
+ lp->rx_free_desc--;
+ }
+ lp->rx_remove_ptr = descptr;
+ }
+
+ /* Allocate new RX buffer */
+ if (lp->rx_free_desc < RX_DCNT) rx_buf_alloc(lp,dev);
+
+ outw(R6040_INT_MASK, ioaddr + 0x40); /* TX/RX interrupt enable */
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ return IRQ_RETVAL(handled);
+#endif
+
+}
+
+
+static struct net_device_stats *
+r6040_get_stats(struct net_device *dev)
+{
+ struct r6040_private *lp = dev->priv;
+
+ RDC_DBUG("r6040_get_stats()", 0);
+ return &lp->stats;
+}
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ */
+static void
+set_multicast_list(struct net_device *dev)
+{
+ struct r6040_private *lp = dev->priv;
+ struct dev_mc_list *mcptr;
+ int ioaddr = dev->base_addr;
+ u16 *adrp, i;
+ unsigned long flags;
+
+ RDC_DBUG("set_multicast_list()", 0);
+
+ /* MAC Address */
+ adrp = (u16 *) dev->dev_addr;
+ outw(adrp[0], ioaddr + 0x68);
+ outw(adrp[1], ioaddr + 0x6A);
+ outw(adrp[2], ioaddr + 0x6C);
+
+
+#if RDC_DEBUG
+ printk("MAC ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]);
+#endif
+
+ /* Promiscous Mode */
+ spin_lock_irqsave(&lp->lock, flags);
+ i = inw(ioaddr) & ~0x0120; /* Clear AMCP & PROM */
+ if (dev->flags & IFF_PROMISC)
+ {
+ i |= 0x0020;
+ lp->mcr0 |= 0x0020 ;
+ }
+ if (dev->mc_count > 4) i |= 0x0020; /* Too many multicast address */
+ outw(i, ioaddr);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ /* Multicast Address */
+ if (dev->mc_count > 4) /* Wait to do: Hash Table for multicast */
+ return;
+
+ /* Multicast Address 1~4 case */
+ for (i = 0, mcptr = dev->mc_list; (i<dev->mc_count) && (i<4); i++) {
+ adrp = (u16 *)mcptr->dmi_addr;
+ outw(adrp[0], ioaddr + 0x70 + 8*i);
+ outw(adrp[1], ioaddr + 0x72 + 8*i);
+ outw(adrp[2], ioaddr + 0x74 + 8*i);
+ mcptr = mcptr->next;
+#if RDC_DEBUG
+ printk("M_ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]);
+#endif
+ }
+ for (i = dev->mc_count; i < 4; i++) {
+ outw(0xffff, ioaddr + 0x68 + 8*i);
+ outw(0xffff, ioaddr + 0x6A + 8*i);
+ outw(0xffff, ioaddr + 0x6C + 8*i);
+ }
+}
+
+static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct r6040_private *rp = dev->priv;
+
+ strcpy (info->driver, DRV_NAME);
+ strcpy (info->version, DRV_VERSION);
+ strcpy (info->bus_info, pci_name(rp->pdev));
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+};
+
+static int
+r6040_close(struct net_device *dev)
+{
+ struct r6040_private *lp = dev->priv;
+
+ RDC_DBUG("r6040_close()", 0);
+
+ /* deleted timer */
+ del_timer_sync(&lp->timer);
+
+ spin_lock_irq(&lp->lock);
+
+ netif_stop_queue(dev);
+
+ r6040_down(dev);
+
+ spin_unlock_irq(&lp->lock);
+
+ return 0;
+}
+
+/**
+ */
+static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+{
+
+ struct r6040_private *lp = dev->priv;
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) & rq->ifr_data;
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irq(&lp->lock);
+ rc = generic_mii_ioctl(&lp->mii_if, data, cmd, NULL);
+ spin_unlock_irq(&lp->lock);
+
+ return rc;
+}
+
+/**
+ Stop RDC MAC and Free the allocated resource
+ */
+static void r6040_down(struct net_device *dev)
+{
+ struct r6040_private *lp = dev->priv;
+ int i;
+ u16 *adrp;
+ int ioaddr = dev->base_addr;
+
+ RDC_DBUG("r6040_down()", 0);
+
+ /* Stop MAC */
+ outw(0x0000, ioaddr + 0x40); /* Mask Off Interrupt */
+ outw(0x0001, ioaddr + 0x04); /* Reset RDC MAC */
+ i = 0;
+ do{}while((i++ < 2048) && (inw(ioaddr + 0x04) & 0x1));
+
+
+ //Restore MAC Address to MIDx
+ adrp = (u16 *) dev->dev_addr;
+ outw(adrp[0], ioaddr + 0x68);
+ outw(adrp[1], ioaddr + 0x6A);
+ outw(adrp[2], ioaddr + 0x6C);
+
+ free_irq(dev->irq, dev);
+
+ /* Free RX buffer */
+ for (i = 0; i < RX_DCNT; i++) {
+ if (lp->rx_insert_ptr->skb_ptr) {
+ pci_unmap_single(lp->pdev, lp->rx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(lp->rx_insert_ptr->skb_ptr);
+ lp->rx_insert_ptr->skb_ptr = 0;
+ }
+ lp->rx_insert_ptr = lp->rx_insert_ptr->vndescp;
+ }
+
+ /* Free TX buffer */
+ for (i = 0; i < TX_DCNT; i++) {
+ if (lp->tx_insert_ptr->skb_ptr) {
+ pci_unmap_single(lp->pdev, lp->tx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_TODEVICE);
+ dev_kfree_skb(lp->tx_insert_ptr->skb_ptr);
+ lp->rx_insert_ptr->skb_ptr = 0;
+ }
+ lp->tx_insert_ptr = lp->tx_insert_ptr->vndescp;
+ }
+
+ /* Free Descriptor memory */
+ pci_free_consistent(lp->pdev, ALLOC_DESC_SIZE, lp->desc_pool, lp->desc_dma);
+}
+
+
+
+#ifdef CONFIG_R6040_NAPI
+static int r6040_poll(struct net_device *dev, int *budget)
+{
+ struct r6040_private *lp;
+ struct r6040_descriptor *descptr;
+ struct sk_buff *skb_ptr;
+ int ioaddr, status;
+ unsigned long flags;
+
+ ioaddr = dev->base_addr;
+ lp = (struct r6040_private *)dev->priv;
+ unsigned long rx_work = dev->quota ;
+
+
+ /* Disable RX interrupt */
+ local_irq_disable();
+ lp->NAPI_RX_RUNNING = 1 ;
+ outw(inw(ioaddr + 0x40) & (~RX_INT) ,ioaddr + 0x40 );
+ local_irq_enable();
+ {
+ descptr = lp->rx_remove_ptr;
+ while(lp->rx_free_desc)
+ {
+ if (descptr->status & 0x8000)
+ break; /* No Rx packet */
+ skb_ptr = descptr->skb_ptr;
+ descptr->skb_ptr = 0;
+ skb_ptr->dev = dev;
+ skb_put(skb_ptr, descptr->len - 4);
+ pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+ skb_ptr->protocol = eth_type_trans(skb_ptr, dev);
+ netif_receive_skb(skb_ptr); /* Send to upper layer */
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += descptr->len;
+ descptr = descptr->vndescp; /* To next descriptor */
+ lp->rx_free_desc--;
+ }
+ lp->rx_remove_ptr = descptr;
+
+ }
+ /* Allocate new RX buffer */
+ if (lp->rx_free_desc < RX_DCNT) rx_buf_alloc(lp,dev);
+
+ local_irq_disable();
+ lp->NAPI_RX_RUNNING = 0 ;
+ /* Enable RX interrupt */
+ outw(inw(ioaddr + 0x40)| RX_INT ,ioaddr + 0x40 );
+ netif_rx_complete(dev);
+ local_irq_enable();
+
+ return 0;
+
+}
+#endif
+
+/* Init RDC MAC */
+static void r6040_up(struct net_device *dev)
+{
+ struct r6040_private *lp = dev->priv;
+ struct r6040_descriptor *descptr;
+ int i;
+ int ioaddr = dev->base_addr;
+ u32 tmp_addr;
+ dma_addr_t desc_dma, start_dma;
+
+ RDC_DBUG("r6040_up()", 0);
+
+ /* Initilize */
+ lp->tx_free_desc = TX_DCNT;
+ lp->rx_free_desc = 0;
+
+ /* Init descriptor */
+ memset(lp->desc_pool, 0, ALLOC_DESC_SIZE); /* Let all descriptor = 0 */
+ lp->tx_insert_ptr = (struct r6040_descriptor *)lp->desc_pool;
+ lp->tx_remove_ptr = lp->tx_insert_ptr;
+ lp->rx_insert_ptr = (struct r6040_descriptor *)lp->tx_insert_ptr+TX_DCNT;
+ lp->rx_remove_ptr = lp->rx_insert_ptr;
+
+ /* Init TX descriptor */
+ descptr = lp->tx_insert_ptr;
+ desc_dma = lp->desc_dma;
+ start_dma = desc_dma;
+ for (i = 0; i < TX_DCNT; i++) {
+ descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct r6040_descriptor));
+ descptr->vndescp = (descptr + 1);
+ descptr = (descptr + 1);
+ desc_dma += sizeof(struct r6040_descriptor);
+ }
+ (descptr - 1)->ndesc = cpu_to_le32(start_dma);
+ (descptr - 1)->vndescp = lp->tx_insert_ptr;
+
+ /* Init RX descriptor */
+ start_dma = desc_dma;
+ descptr = lp->rx_insert_ptr;
+ for (i = 0; i < RX_DCNT; i++) {
+ descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct r6040_descriptor));
+ descptr->vndescp = (descptr + 1);
+ descptr = (descptr + 1);
+ desc_dma += sizeof(struct r6040_descriptor);
+ }
+ (descptr - 1)->ndesc = cpu_to_le32(start_dma);
+ (descptr - 1)->vndescp = lp->rx_insert_ptr;
+
+ /* Allocate buffer for RX descriptor */
+ rx_buf_alloc(lp,dev);
+
+#if RDC_DEBUG
+descptr = lp->tx_insert_ptr;
+for (i = 0; i < TX_DCNT; i++) {
+ printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
+ descptr = descptr->vndescp;
+}
+descptr = lp->rx_insert_ptr;
+for (i = 0; i < RX_DCNT; i++) {
+ printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp);
+ descptr = descptr->vndescp;
+}
+#endif
+
+ /* TX and RX descriptor start Register */
+ tmp_addr = cpu_to_le32(lp->tx_insert_ptr);
+ tmp_addr = virt_to_bus((volatile void *)tmp_addr);
+ outw((u16) tmp_addr, ioaddr+0x2c);
+ outw(tmp_addr >> 16, ioaddr+0x30);
+ tmp_addr = cpu_to_le32(lp->rx_insert_ptr);
+ tmp_addr = virt_to_bus((volatile void *)tmp_addr);
+ outw((u16) tmp_addr, ioaddr+0x34);
+ outw(tmp_addr >> 16, ioaddr+0x38);
+
+ /* Buffer Size Register */
+ outw(MAX_BUF_SIZE, ioaddr+0x18);
+
+ /* PHY Mode Check */
+ phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
+ phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
+
+ if (PHY_MODE == 0x3100)
+ lp->phy_mode = phy_mode_chk(dev);
+ else lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
+
+#ifdef CONFIG_R6040_NAPI
+ /* Sending 15 Tx packets ,only generate one interrupt */
+ outw(0x0F06, ioaddr+ 0x0C);
+
+ lp->NAPI_RX_RUNNING =0;
+#endif
+
+ /* MAC Bus Control Register */
+ outw(MBCR_DEFAULT, ioaddr+0x8);
+
+ /* MAC TX/RX Enable */
+ lp->mcr0 |= lp->phy_mode;
+ outw(lp->mcr0, ioaddr);
+
+ /* Interrupt Mask Register */
+ outw(R6040_INT_MASK, ioaddr + 0x40);
+}
+
+/*
+ A periodic timer routine
+ Polling PHY Chip Link Status
+*/
+static void r6040_timer(unsigned long data)
+{
+ struct net_device *dev=(struct net_device *)data;
+ struct r6040_private *lp = dev->priv;
+ u16 ioaddr = dev->base_addr, phy_mode;
+
+ RDC_DBUG("r6040_timer()", 0);
+
+ /* Polling PHY Chip Status */
+ if (PHY_MODE == 0x3100)
+ phy_mode = phy_mode_chk(dev);
+ else phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
+
+ if (phy_mode != lp->phy_mode) {
+ lp->phy_mode = phy_mode;
+ lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode;
+ outw(lp->mcr0, ioaddr);
+ printk("<RDC> Link Change %x \n", inw(ioaddr));
+ }
+
+ /* Debug */
+// printk("<RDC> Timer: CR0 %x CR40 %x CR3C %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c));
+
+ /* Timer active again */
+ lp->timer.expires = TIMER_WUT;
+ add_timer(&lp->timer);
+}
+
+/* Allocate skb buffer for rx descriptor */
+static void rx_buf_alloc(struct r6040_private *lp,struct net_device *dev)
+{
+ struct r6040_descriptor *descptr;
+ int ioaddr = dev->base_addr ;
+
+ RDC_DBUG("rx_buf_alloc()", 0);
+ descptr = lp->rx_insert_ptr;
+ while(lp->rx_free_desc < RX_DCNT){
+ descptr->skb_ptr = dev_alloc_skb(MAX_BUF_SIZE);
+ if (!descptr->skb_ptr) break;
+ descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, descptr->skb_ptr->tail, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE));
+ descptr->status = 0x8000;
+ descptr = descptr->vndescp;
+ lp->rx_free_desc++;
+ outw(lp->mcr0 | 0x0002, ioaddr); //Trigger Rx DMA
+ }
+ lp->rx_insert_ptr = descptr;
+}
+
+/* Status of PHY CHIP */
+static int phy_mode_chk(struct net_device *dev)
+{
+ struct r6040_private *lp = dev->priv;
+ int ioaddr = dev->base_addr, phy_dat;
+
+ RDC_DBUG("phy_mode_chk()", 0);
+
+ /* PHY Link Status Check */
+ phy_dat = phy_read(ioaddr, lp->phy_addr, 1);
+ if (!(phy_dat & 0x4)) return 0x8000; /* Link Failed, full duplex */
+
+ /* PHY Chip Auto-Negotiation Status */
+ phy_dat = phy_read(ioaddr, lp->phy_addr, 1);
+ if (phy_dat & 0x0020) {
+ /* Auto Negotiation Mode */
+ phy_dat = phy_read(ioaddr, lp->phy_addr, 5);
+ phy_dat &= phy_read(ioaddr, lp->phy_addr, 4);
+ if (phy_dat & 0x140) phy_dat = 0x8000;
+ else phy_dat = 0;
+ } else {
+ /* Force Mode */
+ phy_dat = phy_read(ioaddr, lp->phy_addr, 0);
+ if (phy_dat & 0x100) phy_dat = 0x8000;
+ else phy_dat = 0x0000;
+ }
+
+ return phy_dat;
+};
+
+/* Read a word data from PHY Chip */
+static int phy_read(int ioaddr, int phy_addr, int reg_idx)
+{
+ int i = 0;
+
+ RDC_DBUG("phy_read()", 0);
+ outw(0x2000 + reg_idx + (phy_addr << 8), ioaddr + 0x20);
+ do{}while( (i++ < 2048) && (inw(ioaddr + 0x20) & 0x2000) );
+
+ return inw(ioaddr + 0x24);
+}
+
+/* Write a word data from PHY Chip */
+static void phy_write(int ioaddr, int phy_addr, int reg_idx, int dat)
+{
+ int i = 0;
+
+ RDC_DBUG("phy_write()", 0);
+ outw(dat, ioaddr + 0x28);
+ outw(0x4000 + reg_idx + (phy_addr << 8), ioaddr + 0x20);
+ do{}while( (i++ < 2048) && (inw(ioaddr + 0x20) & 0x4000) );
+}
+
+enum {
+ RDC_6040 = 0
+};
+
+static int r6040_GetSet_MACaddress(struct net_device *dev)
+{
+ struct r6040_private *lp = dev->priv;
+ int ioaddr = dev->base_addr ;
+ u16 *adrp ;
+
+ /* MAC operation register */
+ outw(0x01, ioaddr+0x04); /* Reset MAC */
+ outw(2 , ioaddr+0xAC); /* Reset internal state machine */
+ outw(0 , ioaddr+0xAC);
+ udelay(5000);
+
+ //Restore MAC Address */
+ adrp = (u16 *) dev->dev_addr;
+ outw(adrp[0], ioaddr + 0x68);
+ outw(adrp[1], ioaddr + 0x6A);
+ outw(adrp[2], ioaddr + 0x6C);
+}
+
+static struct pci_device_id r6040_pci_tbl[] = {
+ {0x17F3, 0x6040, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040},
+ //{0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040},
+ {0,} /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, r6040_pci_tbl);
+
+static struct pci_driver r6040_driver = {
+ .name = "r6040",
+ .id_table = r6040_pci_tbl,
+ .probe = r6040_init_one,
+ .remove = __devexit_p(r6040_remove_one),
+};
+
+
+static int __init r6040_init (void)
+{
+ RDC_DBUG("r6040_init()", 0);
+
+ printk(version);
+ printed_version = 1;
+
+ return pci_module_init (&r6040_driver);
+}
+
+
+static void __exit r6040_cleanup (void)
+{
+ RDC_DBUG("r6040_cleanup()", 0);
+ pci_unregister_driver (&r6040_driver);
+}
+
+module_init(r6040_init);
+module_exit(r6040_cleanup);
+
+
+/*
+ * Local variables:
+ * compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c r6040.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
+ * c-indent-level: 4
+ * c-basic-offset: 4
+ * tab-width: 4
+ * End:
+ */
Configurazione linux kernel 2.6.18
Con questa configurazione viene disattivato in particolare il coprocessore matematico
Notare CONFIG_MATH_EMULATION=y
# # Automatically generated make config: don't edit # Linux kernel version: 2.6.18 # Fri Aug 3 13:06:11 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="-nanopc" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # # Block layer # # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" # # Processor type and features # # CONFIG_SMP is not set CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set CONFIG_M486=y # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_PPRO_FENCE=y CONFIG_X86_F00F_BUG=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_INTEL_USERCOPY=y # CONFIG_HPET_TIMER is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y # CONFIG_PREEMPT_BKL is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_MCE is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_MATH_EMULATION=y # CONFIG_MTRR is not set CONFIG_REGPARM=y # CONFIG_SECCOMP is not set CONFIG_HZ_100=y # CONFIG_HZ_250 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 # CONFIG_KEXEC is not set CONFIG_PHYSICAL_START=0x100000 CONFIG_COMPAT_VDSO=y # # Power management options (ACPI, APM) # # CONFIG_PM is not set # # ACPI (Advanced Configuration and Power Interface) Support # # CONFIG_ACPI is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCIEPORTBUS is not set CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_ISAPNP=y # CONFIG_PNPBIOS is not set # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set # CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_CS5535 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set CONFIG_BLK_DEV_IT821X=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=m # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set CONFIG_SCSI_SATA_VIA=m # CONFIG_SCSI_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set CONFIG_R6040=y # CONFIG_R6040_NAPI is not set # CONFIG_8139CP is not set CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=8 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_RSA is not set # CONFIG_SERIAL_8250_FOURPORT is not set # CONFIG_SERIAL_8250_ACCENT is not set # CONFIG_SERIAL_8250_BOCA is not set # CONFIG_SERIAL_8250_HUB6 is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # # Hardware Monitoring support # # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # CONFIG_USB_DABUSB is not set # # Graphics support # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y # CONFIG_SND_RTCTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # ISA devices # # CONFIG_SND_ADLIB is not set # CONFIG_SND_AD1816A is not set # CONFIG_SND_AD1848 is not set # CONFIG_SND_ALS100 is not set # CONFIG_SND_AZT2320 is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_DT019X is not set # CONFIG_SND_ES968 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_MIRO is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # CONFIG_SND_WAVEFRONT is not set # # PCI devices # # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # # USB devices # CONFIG_SND_USB_AUDIO=m # CONFIG_SND_USB_USX2Y is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=m # CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set CONFIG_USB_TOUCHSCREEN=m CONFIG_USB_TOUCHSCREEN_EGALAX=y CONFIG_USB_TOUCHSCREEN_PANJIT=y CONFIG_USB_TOUCHSCREEN_3M=y CONFIG_USB_TOUCHSCREEN_ITM=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # LED devices # # CONFIG_NEW_LEDS is not set # # LED drivers # # # LED Triggers # # # InfiniBand support # # CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # CONFIG_EDAC is not set # # Real Time Clock # # CONFIG_RTC_CLASS is not set # # DMA Engine support # # CONFIG_DMA_ENGINE is not set # # DMA Clients # # # DMA Devices # # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # # Instrumentation Support # # CONFIG_PROFILING is not set # CONFIG_KPROBES is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set # CONFIG_UNWIND_INFO is not set CONFIG_EARLY_PRINTK=y CONFIG_DOUBLEFAULT=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Hardware crypto devices # # # Library routines # CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_KTIME_SCALAR=y
